Task 2: Draw a single path DC circuit.

On a clean piece pf paper, draw a circuit diagram of a DC series circuit consisting of two loads;

• a fuse labelled F1 to protect ALL equipment in the circuit (including meters)
• a single pole switch labelled S1 that controls the circuit
• two resistors labelled R1-10Ω and R2-15Ω
• an ammeter to measure total circuit current (show correct meter polarity)
• a voltmeter to measure supply voltage (show correct meter polarity)

Up load your drawing here. once you have completed all tasks after your teacher has signed you drawing.

A voltage of 10V is applied to a 100 Ω resistor connected in a series circuit. Calculate the current that flows in the circuit:

A 100 Ω resistor connected in a series circuit draws a current of 200mA. Calculate the voltage across the resistor: