a thermostatic control valve

a preheater

a fresh water circulating pump

an expansion tank

Vents should be fitted on top of the systems and connected to expansion tank by pipes mounted horizontally without vertical section.

Adjustable orifices should be fitted to water cooling system.

Cooling water should be heated in cold region.

Vents should be fitted on top of the systems and connected to expansion tank by pipes mounted vertically and preferably without bends and horizontal section.

distributor will open the main air start valves

interlock will be deactivated

compressed air will flow into the cylinder

automatic valve will be open

start air distributor, impeller, hydraulic oil pump, telemotor control system, pilot valve

injection pump, start valves of cylinders, turning gear, flowmeter, start air distributor

turning gear, start air distributor, booster pump, thermostat, flowmeter

pilot valve, start air distributor, turning gear, indicator cocks, start valves of cylinders

lubricators, thermostat, sea chest, water jacket, impeller

thermostat, water jacket, clarifier, sea chest, impeller, bung

sea chest, thermostat, sea water strainer, water jacket, hoses

sea chest, centrifugal separator, thermostat, sea water strainer, scuppers

any major leak would be noticed immediately

any air is removed before the water is led to the HT pumps

any troubles in water cooling system would be noticed

the temperature of the cooling water is controlled automatically by a 3 way valve

fuel injection-combustion

exhaust

intake

top dead center

bottom dead center

compression

regulates the time during which the valves are in opened condition

regulates the time during which the valves are in opened and in closed condition

regulates the vapor

regulates the time during which the gears are in opened and in closed condition

exhaust ports

exhaust valve

fuel injector

dead points