In a common-emitter configuration of a transistor, how does the base current influence the collector current when the collector current is plotted against the collector-to-emitter voltage? 

What is the gain of CE amplifier (biasing configuration as in the ANEL Lab 3 & 4) in BJT AC analysis if Rc = re = 100 Ohm and beta = 100?

What is the value of the VT in the diode current equation at the temperature 127 deg C?

In a transistor circuit configured in common-emitter mode, if the base current is 1.1 µA and the collector current is 99.9 µA, what will be the current flowing through the emitter terminal? 

In the clamper circuit, what should the magnitude of the time constant (RC) be to ensure that the voltage across the capacitor does not significantly discharge during the period when the diode is non-conducting? 

The base emitter voltage in a cut off region is_________

1.      Match the column:

 For a BJT -

a) Base                1)Small in size

b) Collector        2) higher doping level

c) Emitter             3) Moderate doping level

In Exp. No. 2, which apparatus was utilized to reduce the AC signal from 230 V to approximately 15 V? 

What type of signal did you consider for the input of the positive DC clamper circuit in Experiment Number One? 

In a reverse biased PN junction, the current through the junction increases abruptly at