X-Y operating mode is used to plot the Channel 2 signal on the Y axis and the Ch...

✅ The verified answer to this question is available below. Our community-reviewed solutions help you understand the material better.

X-Y operating mode is used to plot the Channel 2 signal on the Y axis and the Channel 1 signal on  the X axis. This mode is independent of the time and plots CH2 voltage with respect to CH1 voltage. To activate X-Y mode on the 2160A oscilloscope, which three actions must be performed?

i. Switch 27 must be set to its X-Y position.ii. Knob 30 must be set to the MAIN position.

iii. Switch 10 must be set to its AC position.iv. Switch 18 must be set to its X-Y position.v. Switch 11 must be set to its DC position.vi. Knob 30 must be set to the X-Y position.

ii, iv, v

❌

i, iv, vi

✅

i, iv, v

❌

ii, iii, vi

❌

Want instant access to all verified answers on myelearning.sta.uwi.edu?

Get Unlimited Answers To Exam Questions - Install Crowdly Extension Now!

Add to Chrome