The beam in Figure 3 is subject to a point load F. The length A is 2m, and the length B is 0.58m,

The beam is rectangular having a cross-sectional width of 35mm, and a depth of 10mm,

and a Young's modulus of 203GPa.

The point load is 41N

The Factor of Safety for the component is 2.1.

Determine the maximum shear force (Answer in N only).

Determine the maximum bending moment (Answer in Nmm only).

Determine the maximum axial stresson the top surface of the beam (MPa).

Determine the maximum axial strain in the beam (strain).

Determine the the minimum yield stress (MPa) based on the FOS.

Select the 5 correct answers from the list below/: