Pada simulasi GNS3 di atas, konfigurasi minimal router Mikrotik agar berfungsi baik adalah sebagai berikut

/ip dhcp-client print
/ip dhcp-client add interface=ether1 disable=no
/interface bridge
add name=bridge1
/interface bridge port
add bridge=bridge1 interface=ether2
add bridge=bridge1 interface=ether3
add bridge=bridge1 interface=ether4
add bridge=bridge1 interface=ether ...dst s/d 8 (tergantung jumlah ethernet card yang dialokasikan).
/ip address add interface=bridge1 address=192.168.100.1/24
/ip route add gateway=bridge1
/ip dns set servers=8.8.8.8
/ip dns set allow-remote-request=yes
 
/ip firewall
 nat add chain=srcnat out-interface=ether1 action=masquerade
/ip firewall
 nat print
Setup DHCP Server dapat menggunakan

/ip dhcp-server setup

Chat saat konfigurasi DHCP Server

Select interface to run DHCP server on 
dhcp server interface: bridge1
 - ketik nama bridge interface

Select network for DHCP addresses 
dhcp address space: 192.168.100.0/24
 - sesuai IP bridge1 & [ENTER]

Select gateway for given network 
gateway for dhcp network: 192.168.100.1
 - sesuai IP bridge1 & [ENTER]

Select pool of ip addresses given out by DHCP server 
addresses to give out: 192.168.100.2-192.168.100.254
 - [ENTER]

Select DNS servers 
dns servers: 192.168.1.1
 - [ENTER] - bisa 8.8.8.8

Select lease time 
lease time: 10m - [ENTER]

Aktifkan DHCP Server

/ip dhcp-server enable
/ip dhcp-server print