Crowdly
Add to Chrome
Questions Bank (1358173 total)
Hardness is reported in HRC, Rockwell C hardness. The HRC value is determined from:
Hardheid word in HRC geraporteer, Rockwell C hardheid. Die HRC waarde word bepaal van:
Match the property with the test used to measure it: (you can use the options more than once)
Pas die eienskap met die toets wat gebruik word om dit te meet: (u kan die opsies meer as een keer gebruik)
Indicate the position over the cross-section of the shaft where the maximum stress will occur.
Dui aan die posisie oor die deursnit van die as waar die maksimum spanning sal voorkom.
The shaft steel is
Die staal van die as is
Which brittle fracture features were present at the outer periphery of the shaft? (More than one answer is allowed.)
Watter brosbreuk kenmerke het by die buiterant van die as voorgekom? (Meer as een antwoord word toegelaat.)
What is the influence of the keyway on the failure?
Watter invloed het die slot op die faling?
Which property of this steel is significant to the failure analysis? The steel can
Watter eienskap van hierdie staal is belangrik tot die failingsanaliese? Die staal kan
Which mixed-mode fracture features were present at the central core of the shaft? (More than one answer is allowed.)
Watter gemenge wyse van breukkenmerke het by die middelkern van die as voorgekom? (Meer as een antwoord word toegelaat.)
Considering the typical loading conditions for the automobile axle shaft, which mode of loading is most relevant to this scenario?
Gegee die tipiese belastingstoestande vir 'n outomobiel wieldryfas hieronder, watter mode van belasting is die meeste van toepassing by hierdie geval?