Шукаєте відповіді та рішення тестів для Basic Electrical Training 2? Перегляньте нашу велику колекцію перевірених відповідей для Basic Electrical Training 2 в elearning.rwu.de.
Отримайте миттєвий доступ до точних відповідей та детальних пояснень для питань вашого курсу. Наша платформа, створена спільнотою, допомагає студентам досягати успіху!
Wie groß ist der berechnete Vorwiderstand für die LED in Aufgabe 1.2 für einen Strom von 20mA? (with units) / How large is the calculated series resistor for the LED in task 1.2 for a current of 20mA? (mit Einheit)
Wie groß ist der am Multimeter in Diodenfunktion gemessene Spannungsabfall der roten LED in Vorwärtsrichtung?/ What is the voltage drop of the red LED in the forward direction measured on the multimeter in the diode mode?
What voltage do you expect at U_out?
Ein Operationsverstärker mit einem Gain von 100.000 wird mit +-15V versorgt und die in der Abbildung angezeigten Spannungen werden an die Eingänge gelegt. Welche Spannung zeigt der Ausgang an? / An operational amplifier with a gain of 100,000 is supplied with +-15V and the voltages shown in the illustration are applied to the inputs. What voltage does the output show?
Ein Operationsverstärker wird mit den Spannungen +-15V versorgt. Die Widerstände sind R_f = 2,2 kOhm, R_1 = 1 kOhm, R_2 = 2,2 kOhm, R_3 = 2.2 kOhm. Die Spannungen betragen U_1 = 0.454V U_2 = 1V und U_3 = 1 V. Wie groß ist die Spannung am Ausgang U_out? / An operational amplifier is supplied with the voltages +-15V. The resistors are R_f = 2.2 kOhm, R_1 = 1 kOhm, R_2 = 2.2 kOhm, R_3 = 2.2 kOhm. The voltages are U_1 = 0.454V U_2 = 1V and U_3 = 1 V. What is the voltage at the output U_out?
Der Operationsverstärker eines Spannungsfolgers wird mit den Spannungen +15V / -15V versorft. Am +Eingang/U_in liegt eine Spannung von -3,65V an. / The operational amplifier of a voltage follower is supplied with the voltages +15V / -15V. A voltage of -3.65V is applied to the +input/U_in.
Wie groß ist die Spannung von U_out? / What is the voltage of U_out?
Ein Operationsverstärker wird mit den Spannungen +-15V versorgt. Der Widerstand R_f = 10 kOhm, der Widerstand R_g = 1 kOhm, An U_in liegt eine Spannung von -1,3V an. / An operational amplifier is supplied with the voltages +-15V. The resistor R_f = 10 kOhm, the resistor R_in = 1 kOhm, a voltage of -1.3V is applied to U_in.
Wie groß ist die Spannung an U_out? How large is the volatage at U_out?
Ein Operationsverstärker wird mit den Spannungen +-15V versorgt. Der Widerstand R_f = 10 kOhm, der Widerstand R_in = 1 kOhm, An U_in liegt eine Spannung von -1,3V an. / An operational amplifier is supplied with the voltages +-15V. The resistor R_f = 10 kOhm, the resistor R_in = 1 kOhm, a voltage of -1.3V is applied to U_in.
Wie groß ist die Spannung an U_out? / How large is the voltage U_out?
What is the typical temperature range for soft soldering?