Crowdly
Додати до Chrome
EG2100 Engineering Design II - Aerospace (PRD1 A 2025/26)
Шукаєте відповіді та рішення тестів для EG2100 Engineering Design II - Aerospace (PRD1 A 2025/26)? Перегляньте нашу велику колекцію перевірених відповідей для EG2100 Engineering Design II - Aerospace (PRD1 A 2025/26) в moodle4.city.ac.uk.
Отримайте миттєвий доступ до точних відповідей та детальних пояснень для питань вашого курсу. Наша платформа, створена спільнотою, допомагає студентам досягати успіху!
Q3 Calculate the required Tsls/MTOW (to 3 d.p.) to satisfy this Hold requirement at a design wing loading (MTOW/Sref) of 5,000 Pa
NOTE: DO NOT MOVE ON TO THE NEXT PAGE WITHOUT ATTEMPTING THESE THREE QUESTIONS!
Consider an aircraft with the following aerodynamic & mission specification:
CD0 = 0.0181; k = 1.23; AR = 8.9
Hold speed = 214 kts at 1500 ft
Rate of turn = 3.6 deg/sThrottle setting 50%
Hold weight = 0.85 MTOW
Answer the following three questions in turn:
Q1 What is the density of the atmosphere at the hold altitude, in kg/m3 , to 4 d.p.?
Q5 What is the dynamic pressure (at 275 kts, 2000 ft), to the nearest Pascal?
Q6 What is the load factor during hold, to 3 d.p.?
Q3 Calculate the required Tsls/MTOW (to 3 d.p.) to satisfy this Hold requirement at a design wing loading (MTOW/Sref) of 8,000 Pa
Recap:
Consider an aircraft with the following aerodynamic & mission specification:
- CD0 = 0.0178; k = 1.21; AR = 8.3
- Hold speed = 275 kts at 2000 ft
- Rate of turn = 2.6 deg/s
- Throttle setting 50%
Hold weight = 0.76 MTOW
Q2 What is the speed of the aircraft at these conditions, in m/s, to 1 d.p.?
NOTE: DO NOT MOVE ON TO THE NEXT PAGE WITHOUT ATTEMPTING THESE THREE QUESTIONS!
Consider an aircraft with the following aerodynamic & mission specification:
CD0 = 0.0178; k = 1.21; AR = 8.3
Hold speed = 275 kts at 2000 ft
Rate of turn = 2.6 deg/sThrottle setting 50%
Hold weight = 0.76 MTOW
Answer the following three questions in turn:
Q1 What is the density of the atmosphere at the hold altitude, in kg/m3 , to 4 d.p.?
Q3 Calculate the required Tsls/MTOW (to 3 d.p.) to satisfy this Cruise requirement at a design wing loading (MTOW/Sref) of 9,000 Pa
NOTE: DO NOT MOVE ON TO THE NEXT PAGE WITHOUT ATTEMPTING THESE THREE QUESTIONS!
Consider an aircraft with the following aerodynamic & mission specification:
CD0 = 0.0172; k = 1.23; AR = 7.6
Cruise Mach = 0.84 at 34,000 ftThrottle setting 77%
Cruise weight = 0.97 % MTOW
Residual rate of climb allowance = 2.1 m/s
Answer the following three questions in turn:
Q1 What is the density of the atmosphere at the cruise altitude, in kg/m3 , to 4 d.p.?