logo

Crowdly

Browser

Додати до Chrome

CVEN3304 - Concrete Structures - 2025 T2

Шукаєте відповіді та рішення тестів для CVEN3304 - Concrete Structures - 2025 T2? Перегляньте нашу велику колекцію перевірених відповідей для CVEN3304 - Concrete Structures - 2025 T2 в moodle.telt.unsw.edu.au.

Отримайте миттєвий доступ до точних відповідей та детальних пояснень для питань вашого курсу. Наша платформа, створена спільнотою, допомагає студентам досягати успіху!

The final set is the time required for the paste to solidify completely and the final set generally occurs at the end of the deceleration stage during cement hydration.
33%
67%
Переглянути це питання
The interfacial transition zone is the weakest place in concrete.
0%
0%
Переглянути це питання

If clinkers cool down slowly after the clinkering zone due to the falure of the cooling system, what mineral will be the largest content in these clinkers? 

Select the correct answer from the list (2 marks)

Переглянути це питання

1) Which zone produces the most important cement mineral in a cement kiln?

2) What is this mineral name?

Select only 1 zone and 1 mineral from the list below. (2 marks)

The question has a partial mark for a correct answer and a penalty for a incorrect answer.

Переглянути це питання

NOTE: Questions 16-19 are under the one Category of Cement Production.

There are four different zones in a burning kiln (before cooling): 

  • Dehydration zone
  • Calcination zone
  • Solid-state reaction zone
  • Clinkering zone.

After the rapid cooling process, this process creates the four main cement minerals: 

  • C3S
  • C2S
  • C4AF
  • C3A

Which zone is involved in the largest CO2 emission during the cement clinkering production? Select the correct answer from the list (2 marks)

0%
0%
0%
0%
Переглянути це питання

Shrinkage only occurs after the concrete is fully hardened.

0%
0%
Переглянути це питання

CaO, Fe2O3, SiO2 and Al2O3 are four major chemical oxides.

0%
0%
Переглянути це питання

All supplementary cementitious

materials have both pozzolanic and hydraulic properties.

0%
0%
Переглянути це питання
Autogenous shrinkage is driven by self-desiccation. The self-desiccation is mainly caused by the consumption of evaporable water during hydration.
50%
50%
Переглянути це питання
Theoretically, cement in a paste mixture can be fully hydrated when the water to cement ratio of the paste is 0.48.
0%
0%
Переглянути це питання

Хочете миттєвий доступ до всіх перевірених відповідей на moodle.telt.unsw.edu.au?

Отримайте необмежений доступ до відповідей на екзаменаційні питання - встановіть розширення Crowdly зараз!

Browser

Додати до Chrome